Home Keaton Car Kilmer Car Clooney Car Tumbler 66 Animated Miscellaneous Collection Discussion Links Guestbook
You are viewing old version of our website. Please click on HOME link to be redirected to new site. Thanks.
Batmobile Forum


  1989 BATMOBILE REPLICA FAQ
 From: Justin | Posted: 8/17/2005 1:48:33 AM |
Troll Bait

Posts: 1355
1989 BATMOBILE REPLICA FAQ

BATMOBILE REPLICA FAQ
“I want one! Where do I get it, how much will it cost, and who will build it for me??”

Ok, so this is gonna come as a surprise to many of you, but those out there who build these replicas are constantly being BOMBARDED with the same general questions, OVER and OVER again. They have been grilled thousands of times in the past by potential clients, friends, and semi-curious passerbys. In fact, I am not sure you could come up with a question that has not been asked a million times in the past! It is redundant, repetitive and just plain irritating.

Of course, 99% of the time, most curious on lookers are just harmlessly seeking information. Most people do not have any secret agendas, and are not out to cause any problems for anyone. However, the fact remains that most people are not interested in answering the same questions OVER and OVER again. So ENTER THE FAQ. This is a brief intro into the replica world, and should give you some point of reference if you are seriously interested in purchasing a Batcar replica for your personal collection. Of course, it is subjective and not all inclusive, but it is a good start. So let’s begin!


Q: HOW MUCH DOES A 1989 KEATON CAR REPLICA COST?
A: This number is incredibly volatile, and is determined by a number of factors. For instance: who you are talking to, what materials are used, etc. As a general point of reference, if you pay $12k for a body shell, or $65k for a turnkey, you are in pretty good shape. Keep in mind – the amount of money you spend on your “kit” will determine how much money you spend in the end, and not always in a positive way. For instance, you can find yourself a body kit for $7k that is made from a splash mold with many imperfections. You are going to spend thousands of dollars in bondo and bodywork to get that body straight and clean before you paint it. However, if you spend the $12k outright on a good, clean body shell that is in little need of repair, then you will have a much easier time prepping it for paint and in the end, you will spend less money.

Q: WHO WILL SELL ME A BODY KIT?

A: First of all, you need to understand the use of the word “kit”. For the purpose of referring to the 1989 Keaton cars, we are taking a great deal of liberty with this word. A “kit” basically means you are getting a body shell and a canopy, a firm handshake and a positive “GOOD LUCK!” You do not get parts or accessories, and you most certainly do not get an instruction manual. The actual construction of the vehicle is up to you, and there is no right or wrong way to do it. Well, actually…. If your car has five wheels and is painted green? That is wrong. Now that we have the whole kit issue settled, let’s get to the heart of the matter. At this moment, there are about three people who have the confirmed ability to provide a 1989 Keaton kit, and about three more who can PROBABLY provide you with a kit. By that, I mean they have a body they can mold, and they have the knowledge and experience to do it if the price was right. Out of these six people, at least FOUR of them lurk or post on this message board. Out of these six, I do not know of ANY who are willing to give you their contact information without knowing who you are for at least several months.

Having said that, do not ask me or anybody else “Can I have the number of someone who can provide me a body?” The answer is NO, plain and simple. Of course, money speaks volumes, so if you in a desperate hurry, you could always send $1,000 to one of the people on this board who knows a builder, and we will pass it on to the builder and the builder will contact you. This is the only way to know for sure if someone is SERIOUS about buying a kit, and that they have the cash to back it up. If time is not an issue, just hang around for awhile, post a lot, and you will eventually find out who the builders are. After everyone knows who you are, we will be a lot more willing to share this privileged information with you. I am also going to start an I WANT TO BUY A KIT thread. Post your info there if you want one of the builders to contact you (but do not be offended if they do not. Remember, they usually don’t NEED to sell you a car. Most of them have real jobs and have enough money already. One more sale is just gravy). If you want to be taken seriously, post your e-mail, occupation, and any other pertinent information. Once you are contacted, be prepared with some cash if you expect any sort of detailed information about the kits. This industry is not fair. It is based on who is privileged enough to have access to a car, or who has done business with who to acquire a set of molds. Unfortunately, those with the molds make the rules.

Q: ARE ALL REPLICA BODIES THE SAME?
A: Well, yes and no. For instance, YES they all descend from the same lineage and therefore are exact replicas of the original car, but NO they are not all made of the same materials, or adhere to the same strict quality standards. Almost every set of molds in existence today can be traced back to Jay Orhberg’s original dealings with WB, and his subsequent breach of contract with them for selling illegal kits to private collectors out the back door. The exact details are irrelevant, but all you need to know is that Jay is the man we should all be thanking for making this car available to the public. For a price. Currently, there are SEVERAL sets of molds floating around, each in different stages of disrepair. This is one factor that can affect the final cost of the kit in question.

In addition, the method of production and materials used will also affect the price. Most bodies are made using POLYESTER RESIN and fiberglass, which is the industry standard in the kit car world. Polyester resin will last for years, but can never compare to the strength and durability of VINYLESTER RESIN. Do your homework, run a few Google searches, and BAM, you’ll be a resin and fiberglass expert. At the very least, you’ll know what I am talking about. The upside: vinylester resin will last a LOT longer and stand up to the daily punishment of being an automobile much better than polyester resin. The downside: vinylester resin is 2-3 times more expensive than polyester resin, and therefore your kit price goes way up. Is vinylester resin necessary? Not a chance. A large number of kit cars made today are made with this inexpensive alternative. The next thing that sets some replica bodies apart is the amount of finishing work that had been done to the body PRIOR to its initial molding. Many splash molds have been taken off of rough bodies that maintain all the minor and major imperfections of the original body. Fun fact: Most of the Keaton car bodies I have seen do not line up perfectly with the canopy. That is, the canopies do not sit flush with the body. Also, many bodies are warped and bent enough to cause problems during construction. Ask many of the replica owners out there what they went through to get their bodies straight or their canopies flush, and you might start to appreciate the value of paying an extra $5k for a kit that was taken from a correct mold. A correct mold would be counted as one that was taken from a car AFTER all the bodywork and straightening had been done to it, instead of before. There are almost NO correct molds in existence today, but there are several people who are prepared to pull a set once they have customers with cash in hand.

The final issue to address in kit quality is the method of pulling the body. The most popular and fastest method to pull a fiberglass body from a set of molds is to blow the chopped fiberglass into the mold and pull it out when it is dry (there is a lot more to it than that, but you get the idea. Again, hit up Google for more information). The BETTER method is to HAND LAY the fiberglass and resin, but this method takes longer and more people involved to get a quality body laid up in the mold. This method is more expensive, but the final product is stronger and lasts longer than blown fiberglass. Is a hand laid body better? Most of the time (if they only hand lay a thin layer, then it doesn’t really matter. The body will still be weak, despite the superior build method). Is it necessary? No way. Many boats and bath tubs are made with blown fiberglass and last for years. It all depends on “WHAT’S IN YOUR WALLET?” (Capital One knock off…)

Q: ARE THEY ROAD LEGAL?
A: It all depends. Yes, you can certainly make them road legal. Heck, if you don’t believe me, check out the threads devoted to the CARMEL REPLICA. This car is one of the few documented and driven regularly to shows and about town. Apparently the owner takes his car out a LOT. With a few modifications to the original design (the addition of practical headlights, airbags for ride height mods, the consideration of rear view mirrors, etc) you can even get your replica titled. One thing to consider – here in California we have a law that allows a certain number of custom vehicles each year (I believe the number is 50, but I am not sure) to be registered based on the CHASSIS and ENGINE that the car is based on. For instance, if you sacrifice a 1994 Caprice Classic to make your car, you can title and register it as a modified CAPRICE CLASSIS, and NOT a “Batmobile kit car”.

“But the car is way too big to drive on the streets!” Oh, rubbish. Check out these stats (provided by our master of numbers and photo manipulation – Tim, and our resident Gotham Avenger builder, JACK!):

Dodge Ram 350 Quad cab...

Here are the numbers:
Batmobile wheelbase: 140"
Dodge Ram wheelbase: 160.5"

Batmobile Length: 236.25"
Dodge Ram length: 249.7"

Batmobile width: 92.5"
Dodge Ram width: 96"

Q: WHAT DONOR CAR IS USED TO BUILD A KIT?
A: You can really use whatever you want to base your car on. Heck, if you are so inclined, you can even custom fabricate your own chassis to get the job done. Would I recommend this method? Nope. I would recommend finding a car with a similar wheelbase to the Batmobile (somewhere between 141-144”, I believe more on the 144” side. Have I measured a body to see how long it is? No. But Dave has! Ask him) and modifying it for your own use. A 1994 Chevrolet Caprice Classic is a great choice, because during that year they were equipped with the Chevrolet LT1 engines (same as used in the Camaros, and a modified version of the Corvette design). The wheelbase is close enough that having it stretched is no big deal, and they are as cheap as dirt. You can also use 70’s style Impalas, or whatever else you wish, or you can strap a carbureted engine in there instead of an EFI block. It doesn’t really matter when you get right down to it – it is all a matter of personal preference.

About the issue of using a Corvette donor car… I guess you should really ask a professional car guy about this, but I have heard it been said that it is not a good idea. The original car was NOT based on a Corvette, and Corvettes (I am only thinking Stingrays here, I do not know much about other Vettes) are so damn short that lengthening them that much becomes a major ordeal. Why not start with a car that is much closer to the original wheelbase to begin with? Can it be done with a Corvette? Sure. Is it the best idea? That is up to you. Your best bet is to visit a few chassis shops and see what they say.

-------------------------------------
Well, that covers a few of the most commonly asked questions in the industry. Is it all inclusive? Of course not. Like I stated before – it is simply a guide to get you started. If you need answers to any other questions, like how this is done or how that is done, then browse through the many pages of threads on this site. There is a good chance your question has already been asked, argued and answered. Good luck in your quest!


Last Edited by Justin: 8/17/2005 1:02:12 PM
------------------------
I made these icons:

 From: KeatonCar | Posted: 8/17/2005 3:16:08 AM |
Limey

Posts: 495
RE: 1989 BATMOBILE REPLICA FAQ

yeah, what he said.


 From: JTC | Posted: 8/17/2005 3:27:45 AM |
Need More Posts

Posts: 17
RE: 1989 BATMOBILE REPLICA FAQ

Very well done.


 From: Webmaster | Posted: 8/17/2005 3:42:34 AM |
Need Life

Posts: 1517
RE: 1989 BATMOBILE REPLICA FAQ

Can you set the questions in bold, Justin?



Last Edited by Webmaster: 8/17/2005 3:43:03 AM

 From: Aussie_Batman | Posted: 8/17/2005 3:51:59 AM |
Beer Drinker

Posts: 142
RE: 1989 BATMOBILE REPLICA FAQ

Awesome....

One question.....!

Does it come in black?

Now running away from flames

Cheers from down here!



 From: Webmaster | Posted: 8/17/2005 3:53:17 AM |
Need Life

Posts: 1517
RE: 1989 BATMOBILE REPLICA FAQ

Justin,
You forgot to mention that you have built few of these already and also how you are writing a guide to be published soon.



 From: Dee | Posted: 8/17/2005 6:31:42 AM |
Dee

Posts: 1409
RE: 1989 BATMOBILE REPLICA FAQ

Excellent composition of Q N A Justin. That was a well thought out and cleverly compiled post. All Batmobile wanna be builders should be thanking you buddy.


 From: Kevin | Posted: 8/17/2005 7:16:54 AM |
Nodeman

Posts: 906
RE: 1989 BATMOBILE REPLICA FAQ

Well-said buddy, I hope you put this on your sight!
I also get very tired answering these same questions over and over again.



 From: Maul | Posted: 8/17/2005 7:28:21 AM |
KITT for now

Posts: 182
RE: 1989 BATMOBILE REPLICA FAQ

Excellent read! Sounds like you've heard these questions before or something...


 From: Tim | Posted: 8/17/2005 7:48:21 AM |
Advertise here!

Posts: 2411
RE: 1989 BATMOBILE REPLICA FAQ

Where can I get a Batmobile kit to for my Trans Am?


Very well written. This should be a sticky post, but I would suggest setting it up so people cannot post replies to it, and move these replies to a seperate thread. You could add a FAQ button above, but we want to make it easy to modify and add to it. DH, can you set up a post that multiple people can edit?

By the way, I got those Dodge numbers above from Jack...


Last Edited by Tim: 8/17/2005 7:56:10 AM

 From: Justin | Posted: 8/17/2005 1:05:07 PM |
Troll Bait

Posts: 1355
RE: 1989 BATMOBILE REPLICA FAQ

A. I bolded the Q&A parts
B. I will probably add this to my site soon
C. The Trans AM Batmobile kit is in the works
D. Thanks for all the positive feedback guys! I definately think this should be a locked sticky thread that a couple of us could edit... Then we can have another thread titled "I WANT A BATMOBILE" that responses could be added in. That way, sellers could peruse that thread and contact potential buyers at their own discretion.


------------------------
I made these icons:

 From: Tim | Posted: 8/17/2005 1:38:00 PM |
Advertise here!

Posts: 2411
RE: 1989 BATMOBILE REPLICA FAQ

...and there should be a seperate thread for comments and questions about the FAQ.

We could call it the BatmoFAQ... or the FAQmobile
Okay, maybe not...


Last Edited by Tim: 8/17/2005 1:38:57 PM

 From: Dee | Posted: 8/17/2005 5:36:19 PM |
Dee

Posts: 1409
RE: 1989 BATMOBILE REPLICA FAQ

Again Justin, great post. I think it will give needed information for those who would like a Bat replica and invaluable information for us who will not rest until we complete our visions and dreams of completing the one and only movie car, nay, the one and only car that just has to be owned and respected. All of us with the passion of owning our own Keaton car thank all important shared information.



 From: Tim | Posted: 8/17/2005 5:47:49 PM |
Advertise here!

Posts: 2411
RE: 1989 BATMOBILE REPLICA FAQ

We could probably also put together a "Building your own body" FAQ or guide. I'm no expert on this, I'm just winging it and learning as I go. We could also call it "Fun things to do with blue foam"






 From: Justin | Posted: 8/17/2005 6:11:57 PM |
Troll Bait

Posts: 1355
RE: 1989 BATMOBILE REPLICA FAQ

Heeeeeeeeeeeeeey! I like that idea... Since you have been working with it the most Tim, and I have been studying it like hell, we could throw together something like that! I like. I have already started outlining a project like that, but I am not very far on it. When I move my screenprinting shop (October 1, we are moving to a 1600 sq. ft. facility) I will pick up some polyurethane foam and go to town. :) Its funny... when I toured my new facility today, I looked at all the extra space and thought "hmmm... I could totally fit a Batmobile in here with plenty of room for tools..."

------------------------
I made these icons:

 From: Tim | Posted: 8/17/2005 6:34:59 PM |
Advertise here!

Posts: 2411
RE: 1989 BATMOBILE REPLICA FAQ

Of course I don't have time to do it, but it would be cool...


 From: Dee | Posted: 8/17/2005 7:54:31 PM |
Dee

Posts: 1409
RE: 1989 BATMOBILE REPLICA FAQ

Mr Webmaster Sir . Is it Ok if I ad a link from My website to yours???


 From: Webmaster | Posted: 8/17/2005 7:57:45 PM |
Need Life

Posts: 1517
RE: 1989 BATMOBILE REPLICA FAQ

You don't have to ask.
I'll put up link to your site soon too

Just avoid those 2 god awful sites: thebatcave8k.com and 1989batmobile.com


Last Edited by Webmaster: 8/17/2005 7:58:17 PM

 From: Dee | Posted: 8/17/2005 8:03:28 PM |
Dee

Posts: 1409
RE: 1989 BATMOBILE REPLICA FAQ

You can have a peek at my site and sister company autobodyworx.ie and see if i'm worthy of a link but rest assured I'll post a link to CLTC and spread the word the closest group of fan's around. Thanks buddy.


 From: Justin | Posted: 8/17/2005 11:46:06 PM |
Troll Bait

Posts: 1355
RE: 1989 BATMOBILE REPLICA FAQ

Hehehe... I agree with DH. STAY AWAY!!!!

------------------------
I made these icons:

 From: Webmaster | Posted: 8/18/2005 1:54:01 AM |
Need Life

Posts: 1517
RE: 1989 BATMOBILE REPLICA FAQ

Awesome site, Dee!


 From: MARK TOWLE | Posted: 8/18/2005 5:42:47 AM |
Mach 5

Posts: 246
RE: 1989 BATMOBILE REPLICA FAQ

NOT BAD..ONLY THINGS I HAVE TO ADD TO IT IS FIRST HERES A NUMBER FOR THOSE PEOPLE 605 254 5259 KORY (THATS ME REP) WILL TALK TO ANYONE ABOUT THESE WONDERFULL RYDES IN KIT OF TURNKEY FORM AND ANSWER QUESTIONS ABOUT THEM OH YEAH AT NO CHARGE..............FYI ITS 500 A YEAR FOR HOMEBUILT (KIT) CARS IN CALI BUT THERE ARE OTHER WAYS AROUND IT ............THE STINGRAY IS ALOT SMALLER CAR THAN THE C4 (85 THRU 96) AND THE C4 CHASIS IS A COMPONENT TYPE SO IT LENDS ITSELF TO BEING STRECHED WITH HARDLY ANY EFFORT............ AND HAND LAYING FIBERGLASS TENDS TO LEAD TO AIR BUBBLES INBETWEEN THE LAYERS AND IN CORNERS MOST PEOPLE USE THE HAND LAYED METHOD BECAUSE ITS CHEAPER ACTULLY .....HENCE CHOP THAT IS BLOWN IN IS ROLLED WITH STEEL ROLLERS IF DONE RIGHT TO ELIMINATE THIS PROBLEM AN REQUIRES BIG MONEY EQUIPMENT............GENERAL MOTORS CO. BELIVES POLYESTER RESIN IS BETTER THATS WHY THEY USE IT TO MAKE CORVETTES FROM THE START UP TILL TODAY ONLY THING IS NOW THEY PRESS THIER PARTS WITH ASSININE AMOUNTS OF PRESSURE........................LASTLY BUT NOT LEASTLY IF IT WERENT FOR BOB BUTTS ONCE AGAIN WE WOULD NOT HAVE THE 89 IT WAS HE WHO WHILE IN POSSESION OF JAYS MOLDS PULLED A BODY AND THEN MADE MOLDS AND A FEW BODIES BEFORE WB STARTED IN ON HIM AND HIS MOLDS DISSAPEARD LOL WE ALL KNOW WHERE THE WENT NOT TO MANY PEOPLE KNOW THIS SO I THOUGHT ID SHARE IT WITH YOU BOB WAS MY MENTOR ON BATMOBILES SO I THOUGHT HE SHOULD GET CREDIT WHERE IT IS DESERVED.........PS THERE WERE 3 PEOPLE WHO HAD RIGHTS TO BUILD 89S FROM THE WB........................OTHER THAN THAT I WOULD AGREE WITH YOU JUSTIN (HOPEFULLY I CAN GET OUTA HERE BEFORE ANY ONE STARTS THROWING ROCKS)


 From: Dee | Posted: 8/18/2005 7:58:28 AM |
Dee

Posts: 1409
RE: 1989 BATMOBILE REPLICA FAQ

MARK.. Wot is the time difference between you and Ireland. I'd love 1 of those Batcouches off ur site. It's excellent.


 From: Tim | Posted: 8/18/2005 8:00:37 AM |
Advertise here!

Posts: 2411
RE: 1989 BATMOBILE REPLICA FAQ

It's five O'clock in the morning there right now. (5:00am) It's 7:00am where I am.

Last Edited by Tim: 8/18/2005 8:02:33 AM

 From: Kevin | Posted: 8/18/2005 12:33:55 PM |
Nodeman

Posts: 906
RE: 1989 BATMOBILE REPLICA FAQ


Sorry but Chevrolet quit using polyester resins back in 1982. All newer Corvettes are injected molded using epoxy polymer resins, starting with the new designed 1984 body style. They needed a resin to withstand the newly designed larger seamless panels, and polyester just didn’t cut it. Polyester resins cannot be used for repairs to the newer Corvettes; it just will not adhere to the substructure, SMC can be used on some of the earlier models.
As far as hand lay up goes, the mat is hand laid and rolled out using a bristle roller hardly anyone uses steel rollers any more. Using this type of roller eliminates air bubbles by perforating the mat while rolling and wetting out the mat. We use different types of mat during the lay up process to give exceptional strength with less resin used.
A chopper gun cuts fine pieces of glass from a glass rope material and mixes it with resin and sprays it on the surface. Chopper guns cause voids, air pockets, and uneven curing causing warpage. Polyester resin has the greatest amount of shrinkage and Epoxy resin as minimal shrinkage.




Pages:    12345








Copyright © 2004-2005 chickslovethecar.com "Chicks Love The Car"
Batman is a registered trademark of DC Comics and Warner Bros.
This is a purely fan based site. No copyright infringement is intended. Click here for privacy policy