Rookie Builder
Batmobile Forum
 Batmobile Home          Batmobile Builders     Calendar     Who's On

Welcome Guest ( Login | Register )
        


«««1920212223»»»

Rookie Builder Expand / Collapse
Author
Message
Posted 1/7/2008 10:38:08 PM


When Batmobiles Fly...

When Batmobiles Fly...When Batmobiles Fly...When Batmobiles Fly...When Batmobiles Fly...When Batmobiles Fly...When Batmobiles Fly...When Batmobiles Fly...When Batmobiles Fly...


Last Login: 7/15/2010 7:44:09 PM
Posts: 223, Visits: 692
We dont hate you

Why do we fall, Master Bruce?
Post #65694
Posted 1/8/2008 12:16:21 AM


Forum Member

Forum MemberForum MemberForum MemberForum MemberForum MemberForum MemberForum MemberForum Member


Last Login: 8/14/2021 5:54:38 AM
Posts: 496, Visits: 2,058
So heres an illustration on v-groove weld.

take the pipe/pipes you want to weld, then grind a bevel around the edge.

then weld in the V to join the metal and grind smooth if you like.



"there ain't no bat!"

Post #65698
Posted 1/8/2008 1:06:28 AM


Has NO LIFE!!

Has NO LIFE!!Has NO LIFE!!Has NO LIFE!!Has NO LIFE!!Has NO LIFE!!Has NO LIFE!!Has NO LIFE!!Has NO LIFE!!


Last Login: 12/26/2023 1:14:45 PM
Posts: 5,397, Visits: 4,909
Did you say square tube? Please tell me you didn't say square tube....BWD
Post #65699
Posted 1/9/2008 1:17:58 PM


Forum Guru

Forum GuruForum GuruForum GuruForum GuruForum GuruForum GuruForum GuruForum Guru


Last Login: 1/3/2016 3:34:07 PM
Posts: 863, Visits: 1,397
chilebean....awesome...thank you. I thought that was it but wasn't too sure. thank you again for your knowledge and pic!

dave...i did say square but it's just for the bottom. take a look at the Awesome-Aussies Creation.

this is what I plan to do...less the front axle/controll arm mount thanks to your ingenius idea. the only square tubing will be underneath me. the rest will be round.  I based my wood mockup frame on this great piece of work...which is the closest match (if not exact) to the vehicle straight from the Wayne Foundation Applied Sciences dept. 


...does it come in black?

Post #65712
Posted 1/10/2008 1:05:31 AM


Forum Guru

Forum GuruForum GuruForum GuruForum GuruForum GuruForum GuruForum GuruForum Guru


Last Login: 1/3/2016 3:34:07 PM
Posts: 863, Visits: 1,397
So here's the humble beginnings of my bridging vehicle. emphasis on Humble.




...does it come in black?

Post #65748
Posted 1/10/2008 1:43:43 AM


Forum Member

Forum MemberForum MemberForum MemberForum MemberForum MemberForum MemberForum MemberForum Member


Last Login: 8/14/2021 5:54:38 AM
Posts: 496, Visits: 2,058
Not to be a downer but I think you should stand those tubes up. It would be stronger.

And since your not on a frame jig  be sure to constantly measure and make sure things are square and level as you go along.

It's cool to see your starting on the metal. That makes what, 3 tumbler builds now

out of curiosity how big will your tumbler be? length, width, ect.

"there ain't no bat!"

Post #65751
Posted 1/10/2008 8:15:08 AM


Getting Better at Internets

Getting Better at Internets


Last Login: 11/13/2022 6:06:37 AM
Posts: 2,698, Visits: 8,392
WAHOO METAL!  Hey Conrad did you ever fix those measurements that you were talking about a while back towards the beginning of your build, i seem to remember you saying you were going to make it a tad lower, and wider, or something like that.

“It’s not who I am underneath, but what I do that defines me”
Post #65753
Posted 1/10/2008 11:06:44 PM


Forum Guru

Forum GuruForum GuruForum GuruForum GuruForum GuruForum GuruForum GuruForum Guru


Last Login: 1/3/2016 3:34:07 PM
Posts: 863, Visits: 1,397
bean, no downer...I think it'll be Ok. i will have a sheet welded under most this bottom portion of the frame so that should strengthen things a bit. It turns out that the total length will be about 15 feet long and 6 1/2 feet wide (less the body panels).  I definetley won't be doing the complete frame on bricks. You said it bean, I'm measuring 10 times and cutting once. when I get started with the tubing i will no doubt build the jig. those I beams are pretty pricey. i need 2 15 footers at about $350 each. I've taken a lesson from the pages of BWD's Rumbler Fabricators and realized that it will be impossible to fabricate this vehicles tubular chassis without a jig. Again, what you see here is only the bottom.

and yeah Shagg, the adjustments have been thought out and made.  what did Pontiac used to say?....W-I-D-E-R is better.


...does it come in black?

Post #65758
Posted 1/11/2008 12:30:55 PM


Has NO LIFE!!

Has NO LIFE!!Has NO LIFE!!Has NO LIFE!!Has NO LIFE!!Has NO LIFE!!Has NO LIFE!!Has NO LIFE!!Has NO LIFE!!


Last Login: 12/26/2023 1:14:45 PM
Posts: 5,397, Visits: 4,909
Hey Conrad, Ok I don't want to come across as a downer. But.........Chilibean is right....Think of building it with wood 2x4s you would want to build it with the 4" part going up and down and a big heavy x-tube from corner to corner. The load factor on that floor is critical for strength. That's why the round tube is so nice it displaces the load across a circle. And even the Aussie one could and should have been made with round tube.

One interesting thing about load and stress placed on a frame is the the load will transfer from one place to the weakest place. Imagine if you had forgot to weld a joint even if it was not in a critical point the load and stress would move to that point. Your floor is like the safety capsule of a racecar and it has to be strong strong strong....

Ok thanks for letting me say that and I want to say I am 100% behind your efforts. I hope you don't mind me posting a picture of my 89 floor to show you some cross bracing. But even in this application the outside of the Cadillac box frame is where the stress is carried.

Also another suggestion, don't limit yourself to metal shops for materials checkout your local metal salvage yard just because its used does not mean it's inferior. Metal has a long life and salvage yards are a great source of used metal materials. I am planning on using a titanium fan on my 89....Yeah from a salvage yard...How much do you think that would cost at a retail center...Your Pal BWD

Post #65761
Posted 1/11/2008 12:46:24 PM


Forum Guru

Forum GuruForum GuruForum GuruForum GuruForum GuruForum GuruForum GuruForum Guru


Last Login: 1/3/2016 3:34:07 PM
Posts: 863, Visits: 1,397
Thanks for all the info and advice. this isn't a downer. everything can always be better. I mean is this really going to be THAT weak? is there nothing that can be done to strengthen it? My neighbor who rebuilds cars ( specifically mitsubishi 300GT's ) said it'll do but the other way is stronger. Not that i'm settling...Any ideas on what I would use to make this stronger the way it is? I always ALWAYS appreciate the ideas and advice. Don't Stop....




...does it come in black?

Post #65762
« Prev Topic | Next Topic »

«««1920212223»»»

Reading This Topic Expand / Collapse
Active Users: 2 (2 guests, 0 members, 0 anonymous members)
No members currently viewing this topic.

Permissions Expand / Collapse

All times are GMT -5:00, Time now is 8:32am


Execution: 0.313. 8 queries. Compression Disabled.

Batman (1989 Version)

CLTC Club Shirts




1989 Batmobile Kit 1989 Batmobile Kits
1989 Batmobile Builders Batmobile Kit
Batmobile Kits 1989 Batmobile Builder





Batman and all related characters and elements are trademarks of and DC Comics and WB.
Use of anything related to "Batman" on this site is not to infringe upon the copyrights of DC Comics or WB.
The purpose of chickslovethecar.com is to foster positive discussion about one of the greatest vehicles of all time.
This site does not sell or build any related cars or kits. © 2004-2012 chickslovethecar.com "Chicks Love The Car"
Images linked courtey of cltc.co.

You can contact us by clicking here.