|
|
 Posted 11/18/2021 12:39:32 PM |
|
|
Junior Member
 
Last Login: 3/15/2023 1:12:51 PM
Posts: 56,
Visits: 485
|
|
Thanks anyway! Good luck on your build!
Got another gauge for the dash- not 100% but close
|
|
|
|
| Posted 11/18/2021 12:45:15 PM |
|
|
Junior Member
Last Login: 4/8/2024 8:41:57 AM
Posts: 51,
Visits: 655
|
|
That collection grows quickly when you start locating all of the parts needed. You'll have a completed car in no time at this rate! I'm Jealous! 
Brian - Knightdriver
|
|
|
|
| Posted 11/18/2021 12:57:48 PM |
|
|
Junior Member
Last Login: 3/15/2023 1:12:51 PM
Posts: 56,
Visits: 485
|
|
I wasnt going to go all out with the inside until YOU ^^
All of the correct gauges have been found by KNIGHTDRIVER and he plans on making dash parts. Ive got first dibs lol
Everything is getting together like a good plan. Still have lots of unknowns but less day by day.
|
|
|
|
| Posted 11/19/2021 10:03:39 AM |
|
|
Junior Member
Last Login: 3/15/2023 1:12:51 PM
Posts: 56,
Visits: 485
|
|
Another day, another package
An exhaust temp gauge from Westach- not 100% but closest you can find
|
|
|
|
| Posted 11/28/2021 10:30:06 AM |
|
|
Junior Member
Last Login: 4/26/2023 6:48:33 PM
Posts: 14,
Visits: 321
|
|
What would be the ideal size for the wheels and tires if yours are not?
Lance
|
|
|
|
| Posted 12/6/2021 5:00:03 PM |
|
|
Junior Member
Last Login: 3/15/2023 1:12:51 PM
Posts: 56,
Visits: 485
|
|
The diameters are spot on at 15". The widths it depends who you ask and what car is used as a donor. When I said ideal I meant the backspacing for the Impala is too much, will have to use spacers.
|
|
|
|
| Posted 1/12/2022 9:14:50 AM |
|
|
Junior Member
Last Login: 3/15/2023 1:12:51 PM
Posts: 56,
Visits: 485
|
|
More gauges, these have warped needles
These are either identical or very very close:
|
|
|
|
| Posted 1/12/2022 9:26:35 AM |
|
|
Junior Member
Last Login: 3/15/2023 1:12:51 PM
Posts: 56,
Visits: 485
|
|
MOUNTNEY TRADITIONAL STEERING WHEEL
12 Inch diameter,6 Hole mounting,102mm PCD
89mm Diameter centre hole
Semi-Dished (33mm depth from front of wheel to mounting point)
Black centre, Black Leather
|
|
|
|
| Posted 1/12/2022 9:34:11 AM |
|
|
Junior Member
Last Login: 3/15/2023 1:12:51 PM
Posts: 56,
Visits: 485
|
|
Steering stuff. Hopefully I got the correct Spline count for the Steering box and gm steering shaft. 36 and 30 spline to DD U-joints. Got 2x 35" DD steering shaft, 1x 24" DD steering shaft and 2 DD to DD 30 degree angle U-joints and three 3/4" steering shaft end links. Will buy extras just in case.
|
|
|
|
| Posted 1/12/2022 9:42:23 AM |
|
|
Junior Member
Last Login: 3/15/2023 1:12:51 PM
Posts: 56,
Visits: 485
|
|
Here are the engine and transmission crossmembers from Trans-adapt. My donor is a 96 Impala SS so I have a LT1 and a 4L60E.
The engine crossmember is a SBC universal one with rubber mounts, the trans crossmember is a 6" drop one- I hope that is doable and I didn't shoot myself in the foot with that one lmao
Here are the show 'n go motorized retractable license plate holders- not sure if I am gonna use these, will see
|
|